Operating Your Snow Thrower - Yard-Man 31AE6GKF500 User Manual

4. Finishsecuringchute controlassemblyto chute
support bracketwith wingnut and hexscrew removed
earlier.See Figure3-4.
Figure 3=4
5. Checkthat all cablesare properlyroutedthroughthe
cable guideon topof the engine.See Figure3-5.
The extensioncord is fastenedwith a cabletie to the rear
of the auger housingfor shippingpurposes.Cut thecable
tie and removeit beforeoperatingthe snowthrower.
CAUTION:Priorto operating your
snowthrower, referto Auger Control
Teston page 13. Readand follow all
instructionscarefully,and performall
adjustments to verify your snowthrower
is operating safely and properly.
Figure 3=5
Shear Pin Storage (optional)
An areafor convenientshearpin storageis locatedunder
the plasticdashpanel.See Figure3-6.
/
/Y
,%
Figure 3=6
7
Setting U p
CAUTION
Prior to operating
your snow thrower,
refer to Auger Control
Test on page 13.
Read and follow all
instructions care-
fully and perform all
adjustments to verify
your unit is operating
safely and properly.