Wi-Fi; Sharing Your Phone's Data Connection - Huawei Prism II User Manual

7.2 Wi-Fi

Wi-Fi gives you wireless access to broadband Internet. To use Wi-Fi on your mobile phone, you must have an access to wireless access points
(hotspots). Obstacles that block the Wi-Fi signal will reduce its strength.
7.2.1 Turning On Wi-Fi
1. Touch > Settings.
2. Under WIRELESS & NETWORKS, touch the button next to Wi-Fi.
7.2.2 Connecting to a Wireless Network
1. After turning on Wi-Fi, touch
2. Under WIRELESS & NETWORKS, touch Wi-Fi to display the Wi-Fi screen. You will see a list of detected Wi-Fi networks.
3. Touch a Wi-Fi network to connect to it.
• If you select an open network, your mobile phone will automatically connect to it.
• If you select a network that is secured with Wired Equivalent Privacy (WEP) and it is the first time that you have connected to it, enter the
password as prompted, and then touch Connect. If you connect to a secured wireless network that you have already used, you will not be
prompted to enter the password again unless you have reset your mobile phone to its default settings.
On the Wi-Fi settings screen, touch

7.3 Sharing Your Phone's Data Connection

You can share your mobile phone's data connection with a single computer via a USB cable: USB tethering. You can share your mobile phone's data
connection with a number of devices at the same time, by turning your phone into a portable Wi-Fi hotspot.
7.3.1 Sharing Your Phone's Data Connection via USB
To use USB tethering in different operating systems, you may need to prepare your computer to establish a network connection via USB.
You cannot share your phone's data connection and access its microSD card via USB at the same time.
1. Touch > Settings.
2. Under WIRELESS & NETWORKS, touch More... > Tethering & Mobile Hotspot.
3. Select the USB tethering check box to share your data connection.
7.3.2 Sharing Your Phone's Data Connection as a Portable Wi-Fi Hotspot
1. Touch > Settings.
2. Under WIRELESS & NETWORKS, touch More... > Tethering & Mobile HotSpot.
> Settings.
to add a new Wi-Fi network.
25