Replace Batteries; Backup Battery; Remote Control Battery - Gigaware 40-310 User Manual

Snooze
When the alarm sounds, press Z Z
remote to stop the alarm for 10 minutes.
mode. The clock radio goes back to the mode before the alarm
activated. The alarm sounds again after 10 minutes.
Nap
In standby mode:
1. Press Z Z
remote to select a nap period of 15, 30, 45, or 60 minutes,
or select OFF to deactivate the nap feature.
2. Press ALARM MODE to select Buzz, iPod or FM mode.
n
Note: Once the nap feature is activated, the clock radio starts to
count down. The alarm turns on automatically at the end of the set
time period.

Replace Batteries

Backup Battery

1. Open the battery
compartment door.
2. Insert a new 3V, CR2025
battery into the battery
compartment with correct
polarity (+ and –) as marked inside.
3. Replace the door.

Remote Control Battery

1. Press the tab on the battery
compartment tray and slide the
battery compartment tray out.
Z
on the main unit or SNOOZE/NAP on the
Z
or SNOOZE/NAP on the
8
flashes in snooze