Connecting A Non-Av-Link Vcr - Samsung TV Owner's Instructions Manual

Connecting a non-AV-Link VCR

You can connect a VCR to the television using a:
Coaxial cable
SCART cable
S-Video cable
1
Plug the aerial input cable into the appropriate socket on the VCR.
2
Connect a coaxial cable to the:
VCR aerial output socket
Television aerial input socket
3
To obtain better picture quality and, in addition, simplify the setting
up procedure of the VCR, you can connect a SCART cable
between:
The AV (SCART) socket on the VCR
and
A SCART socket on the rear of the television (see page 44 for
further details on the various connection possibilities)
It is recommended that you use the Ext 2 connector as it
can process a Y/C signal (luminance and chrominance).
4
Follow the instructions supplied with your VCR to tune the VCR to
your television.
Rear of the TV
EXT2
(VCR)
EXT1
AV-link
Aerial output
SCART
cable
OUT TO TV
DECODER
L
IN FROM
G M
ANT.
ATT.
AV
A
M
TEST
A
COUL N/B
Aerial input
9
ENG
75
VHF/UHF
EXT3
(DECODER)