Displaying the Teletext Screen
You can display Teletext information at any time on your television.
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
Information may be missing
Some pages may not be displayed
To activate the Teletext mode and display the contents page, follow
the instructions below.
1
Select the channel providing the Teletext service, using the P
(
) or P
(
) buttons or the VIDEO button (
2
Press the TEXT/MIX button to activate the Teletext mode.
Result:
The contents page is displayed.
3
If you wish to display the actual broadcast at the same time as the
Teletext page, press the TEXT/MIX button again.
4
When you have finished, press the TV button (
viewing normally.
A message box containing the words "No Text
Transmission" will be displayed if the selected channel
does not carry a Teletext signal.
).
) to continue
ENG
37