Advertisement
Quick Links
Next Generation Intelligent Lon® EIA/ANSI 709 Router
Provisional Installation Guide
Quick Installation Notes
These notes should be used in conjunction with the LonFibre router data sheet and the
latest Echelon's Router and Repeater User's Guide 078-0018-01A
Power Connection and Supply
Warning - Power inputs are polarity insensitive.
Typical Power input: 24VDC @150mA, power on indicator green LED.
{Operating voltage: ± 10-50 VDC or 12-30 VAC}
Lon Copper Port Installation
These should be connected in accordance with the appropriate requirements as set
down by Echelon for the specific LonTransceiver type.
Fibre Port Installation
Fibre ports must always be connected so that a left port is connected to a right port of
the next node in the ring. Segments must obey the same rules; i.e. even if only two
nodes are connected, the left port of one must connect to the right port of the next.
All connections must be made with multimode or singlemode Fibre optic cable.
Minimum use of patch panel connections is recommended, as each patch introduces
optical loss.
22/10/2009
1
Rev1.0
Copyright Control Network Solutions Ltd 2009
Advertisement
Related Manuals for Echelon Lon EIA/ANSI 709
Summary of Contents for Echelon Lon EIA/ANSI 709
- Page 1 Next Generation Intelligent Lon® EIA/ANSI 709 Router Provisional Installation Guide Quick Installation Notes These notes should be used in conjunction with the LonFibre router data sheet and the latest Echelon’s Router and Repeater User’s Guide 078-0018-01A Power Connection and Supply Warning - Power inputs are polarity insensitive.
- Page 2 Fibre Port LED indicators ‘Solid green’ LED means the fibre port is receiving link signals from far node and the fibre network is operating redundantly. ‘Solid yellow’ LED means the fibre port is receiving link signals from far node and the fibre network is operating as a ‘segment’ or ‘multidrop’. ‘Fast Blinking yellow’...
-
Page 3: Front Panel
Front Panel Contact Details Control Network Solutions Ltd Studio 7, Intec 2, Intec Business Park Wade Road, BASINGSTOKE, Hampshire, RG24 8NE, England Tel: +44 (0) 1256 818700 Fax: +44 (0) 1256 812520 Email: cns@control-network-solutions.co.uk Web: http://www.control-network-solutions.co.uk No part of this publication may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, in part or in whole, without prior permission of Control Network Solutions.