Samsung CS29Z40 Owner's Instructions Manual

COLOR TELEVISION
CS29Z40/29Z45/29Z50
WS32Z40
Owner's Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at www.samsung.com/global/register.
Record your Model and Serial number here for future reference.
▪ Model __________ ▪ Serial No. __________
Control Panel
(depending on the model)
➢
The product colour and shape may vary depending on the
model.
Front (or Side) Panel
1 2 3
1 Remote control sensor
2 Standby indicator
3 Power on/off
4 On-screen menu display
5 Volume adjustment
6 Channel selection
 You can use the 6 buttons to switch the TV on when it is
in standby mode depending on the model.
 The 5 and 6 buttons also have the same function as the
◄/►/▲/▼ buttons on the remote control.
 If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Connection Panel
➢
The product colour and shape may vary depending on the
model.
Rear Panel
2
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
☛
Please be sure to match the colour coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
4 5 6
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor aerial,
cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the RCA Input
The RCA3 connectors are used for equipment, such as a
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player. (When using the mono equipment, connect
to the AUDIO-L input connector.)
The RCA4 connectors are used for equipment such as a
DVD with component output.
(depending on the model)
5
1 2
1
or
3
4
cable television
network
English - 1
Connecting to the HDMI Input
The HDMI5 connector is used for equipment with HDMI
output, such as a Set-Top Box, DVD player, AV receiver or
digital TV.
No additional Audio connection is needed for an HDMI
➢
to HDMI connection.
Side Panel
1 S-Video input
Video input
2
Audio input
3
Connecting to the S-VIDEO Input
The 1 (S-VIDEO IN) and 3 (AUDIO-L/R) connectors
are used for equipment with an S-Video output, such as a
camcorder or VCR.
Connecting to the RCA Input
The 3 (AUDIO-L/R) and 2 (VIDEO) connectors are used for
equipment, such as a camcorder, video disc player, or video
game device.
AA68-03903A-01