Features and Benefits
The PRO
packaged refrigeration systems combine evaporator and condensing unit into one unit — simplifying
3
installation and reducing refrigerant charge — saving time, money and energy.
The latest addition to the PRO
small- to medium-sized restaurant and convenience store applications where maximum airflow is essential for
pulling down the temperature of foods or beverages. The Side Mount PRO
medium temperature models, ensuring maximum performance in storage applications slightly above freezing.
For holding temperature with maximum space, see the PRO
PTN and PTT).
Ease of Installation and Service
•
Installation takes a fraction of the time required for a split system: refrigerant is pre-charged at factory,
superheat adjustment is not required and unit slides into slots in standard walk-in panel (see installation manual
for more information)
•
Designed for simple serviceability: the condensing unit section's cabinet door can be quickly removed; in
addition, the electrical box is located outside the cabinet for easy access
•
Flexible design allows for multiple installation methods: Optimized for outdoor use, but can be used indoors
as well (with drain connection)
•
Lifting lugs and hanging brackets in evaporating section allow for easy installation
Ease of Use
•
System is factory-assembled, evacuated, charged, run-tested and wired; no additional components required
•
Controls preset for typical applications: +38° F for high temp. coolers, +35° F for medium temp. coolers, -10° F for
freezers and are easy to adjust
Performance
•
Maximized airflow: evaporator placement in walk-in box with pull-through fans
•
Suitable for temperature pull-down and holding temperature
•
Increased condenser capacity, by avoiding compressor heat
•
Improved tolerance in high-ambient conditions
•
Electric defrost in medium temperature models, allowing for maximum
performance in storage applications just above 32°F
•
Fan-cycling for head pressure control
•
Crankcase heater
•
Drain line heater
Reliable | Durable
•
System is fully-assembled and quality-tested at the factory
•
Electronic microprocessor control provides accurate temperature control
•
Liquid-line filter drier
•
Two-year parts warranty
Environmentally Friendly
•
Energy Solutions® energy-efficient motors from InterLink™ Commercial
Refrigeration Parts:
•
PSC motors standard in both condensing unit and evaporator section
•
EC motors optional, but may be required in some states (evaporator section only)
•
Reduced refrigerant charge: the PRO
10 percent* of refrigerant required for a comparable split system
* Results may vary. Estimate based on a typical 100-foot refrigerant line length.
family, the PRO
Side Mount is optimized for outdoor applications and is ideal for
3
3
Side Mount packaged refrigeration system uses approximately
3
is also available with electric defrost
3
Top Mount packaged refrigeration system (models
3