Lenovo ThinkServer TD330 Manual page 31

Power status LED
On
Off
Blinking
2 Hard disk drive status LED
The hard disk drive status LED helps you to determine the status of the hard disk drive activity.
Note: The hard disk drive status LED is only for server models with non-hot-swap hard disk drives.
Hard disk drive status LED
Off
Blinking
3
NIC 1 status LED
4 NIC 2 status LED
The two NIC status LEDs indicate the LAN status for the Ethernet connector 1 and Ethernet connector 2
on the rear panel of the server.
NIC status LED
On
Off
Blinking
5 System status LED
The system status LED helps you to determine if there are any system errors.
System status LED
On
Off
6 Front USB connector 1
7
Front USB connector 2
Used to attach a USB-compatible device, such as a USB keyboard, mouse, scanner, or printer. If you
have more than six USB devices, you can purchase a USB hub, which you can use to connect additional
USB devices.
Color
Blue The server is on.
None The server is off.
Blue
The server is in ACPI S1 mode, which also is known
as Power On Suspend (POS) mode. In this mode, the
microprocessor is not working while other hardware
devices are still working.
Color
None The hard disk drive is not in use.
The hard disk drive is active and data is being
Green
transferred.
Color
Green The server is connected to a LAN.
None The server is disconnected from a LAN.
The LAN is connected and active.
Green
Color
Amber A system error has occurred.
None The server is off or the server is on and is working
correctly.
Description
Description
Description
Description
.
Chapter 3 Product overview
17