Lenovo ThinkServer TD330 Manual page 171

8. Remove the two screws at the rear of the chassis and the two screws on the metal clip at the front of
the power distribution board and cage assembly. Then, push the power distribution board and cage
assembly to the rear, and then carefully slide it out of the chassis.
Figure 97. Removing the power distribution board and cage assembly
9. Touch the static-protective package that contains the new power distribution board and cage assembly
to any unpainted surface on the outside of the server. Then, remove the new power distribution board
and cage assembly from the package.
.
Chapter 6 Installing, removing, or replacing hardware
157