Programming.combo.device.codes; Controlling.combo.devices - GE 24929 Instruction Manual

Setup, cont.
Programming Combo Device Codes
Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/
VCR,.etc.).will.require.you.to.set.up.two.different.Mode.
buttons.to.control.both.parts.of.the.Combo.device..For.
example,.if.you.have.a.TV/DVD.Combo,.you.might.
need.to.set.up.one.code.under.the.TV button.to.control.
the.TV.part.AND.a.separate.code.(under.any.other.
Mode.button).to.control.the.DVD.part.
Controlling Combo Devices
Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/
VCR,.etc.).have.separate.buttons.on.the.original.remote.
to.select.the.part.of.the.Combo.device.to.be.controlled..
For.example,.if.your.Combo.device.is.a.DVD/VCR.
then.its.original.remote.might.have.separate.DVD.and.
VCR.buttons.for.selection.of.the.Combo.part.you.would.
control..The.equivalent.button.functions.can.be.found.
on.your.new.remote.by.using.the.device.Mode.and.
SETUP buttons...
Referring.to."Programming.with.Code.Search".on.
page.8,.setup.a.device.Mode.(e.g..DVD).with.the.
correct.code.for.your.Combo.device..Assuming.the.
DVD/VCR.Combo.device.is.the.example.and.its.code.
is.programmed.under.DVD Mode,.press.and.hold.the.
DVD.Mode.button.for.more.than.one.second.to.send.
the.DVD.button.command..To.send.the.VCR.button.
command,.quickly.press.and.release.the.SETUP button.
followed.by.pressing.and.releasing.the.DVD.Mode.
button..This.method.can.be.applied.similarly.to.all.
Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.
etc.).and.is.available.for.all.Modes..Note.this.feature.is.
not.supported.by.all.codes..
Controlling Devices Requiring Separate Power On
and Off Buttons
Some.devices.(e.g..certain.RCA.TVs).require.separate.
Power.On.and.Power.Off.buttons.to.turn.the.device.on.
and.off..The.equivalent.button.functions.can.be.found.
on.your.new.remote.by.using.the.device.Mode.and.ON-
OFF buttons..Referring.to."Programming.with.Code.
Search".on.page.8,.setup.a.device.Mode.(e.g..TV).with.
the.correct.code.for.your.device..
Assuming.a.TV.device.is.the.example.and.its.code.is.
programmed.under.TV.Mode,.to.turn.your.TV.on,.press.
and.hold.the.TV.Mode.button.for.more.than.one.second.
to.transmit.the.Power.On.button.command..
Controlling Devices Requiring Separate Power On
10