Table of Contents
Advertisement
Quick Links
GSM Door
Optional Accessories:
See page 17
DE-H1 Outdoor Housing
Please read this user manual and the quick setup guide completely and keep it for your future reference.
MADE IN TAIWAN
4 BAND GSM WIRELESS MODULE MADE IN GERMANY
Copyright © 2012 by Sentry US. All Rights Reserved. Contents within manual are subject to change without notice.
www.sentryus.com
Gate Intercom Entry System
/
For Single Unit
GSM‐DE3100
DE-H2 Outdoor Housing
with Access Control Keypad
Speaker
Call Button
DE-H2 Outdoor Housing
USER MANUAL
USA VERSION
Microphone
with Camera
IP65
R201209‐V17
Advertisement
Table of Contents
Related Manuals for Sentry GSM‐DE3100
Summary of Contents for Sentry GSM‐DE3100
-
Page 1: User Manual
Optional Accessories: See page 17 DE-H1 Outdoor Housing DE-H2 Outdoor Housing DE-H2 Outdoor Housing with Access Control Keypad with Camera Please read this user manual and the quick setup guide completely and keep it for your future reference. MADE IN TAIWAN IP65 4 BAND GSM WIRELESS MODULE MADE IN GERMANY Copyright © 2012 by Sentry US. All Rights Reserved. Contents within manual are subject to change without notice. R201209‐V17 www.sentryus.com ... -
Page 2: Caution
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems). This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. CAUTION When using this GSM Door / Gate Intercom Entry System, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. Please read the following before using your equipment. 1. Handle this product with care Avoid any shock or bumping of the product. Improper handling could damage the product. 2. Cleaning Unplug the product before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Requires a proper operating environment This product is designed for outdoor use. Do not use this product near water. Do not use this product near an area where there is a potential of gas leaks or near any fumes that can be explosive. Do not place this equipment near or over a radiator or any other heat source. Avoid using the equipment during an electrical storm. There is a remote risk of electrical shock from lighting. 4. Check the power source voltage The power source voltage should be within the specified range (Product must meet the specifications). Do not overload the wall outlet or power cord where the power adapter is installed. This can result in fire or electric shock. 5. Objects and liquid entry Never push objects of any kind into this product as this may touch dangerous voltage points of short out parts that could result in a fire or electric shock. Never spill any kind of liquid on the product. ... -
Page 3: Table Of Contents
INDEX CAUTION ................................ 2 FRONT PAGE OF QUICK SETUP GUIDE ........................ 4 PACKAGE CONTENTS .............................. 5 INTRODUCTION .............................. 5 ROLE ASSIGNMENT .............................. 5 ‐6 INSTALLATION .............................. 7 ‐8 SIM CARD INSTALLATION ............................ 7 SYSTEM INSTALLATION ............................ 8 WIRIING DIAGRAM .............................. 8 WIRING LOCKS ............................... ... - Page 4 See page 13 for enlarged screen capture pictures ...
-
Page 5: Package Contents
PACKAGE CONTENTS 1) 2) 3) 4) Panel – Front Panel – Rear Stainless Steel Surface Mount GSM External Antenna 3M Sticker + One (1) with Plastic Back Cover Panel Housing (9.8ft/3m lead) Screw & Wall Anchor with Bracket for Antenna Bracket 5) 6) 8) 9) ... - Page 6 (ITEM 17 on page 14) may be adjusted from 10 seconds to 99 seconds to adjust for different GSM service providers for voicemail answering. To register for one Admin only (11, 12, 13), set Ring Divert Time to 99 seconds. It is important to know that each Admin can dial program the system but only one (1) of the Admins (11, 12, 13) can register admins, users, and change system settings via SMS. This person with SMS capability is referred to as the Power Admin. Note: Once the power is unplugged from the system, the Power Admin is erased from the system. The Passcode should be kept confidential and be released to qualified Admins only. Role Assignment Examples: Example 1: A Single‐family Home Person Admin Functions Settings Homeowner’s phone number is registered to When the call button is pressed, this is the Admin 11; Family Member 1 is registered to Homeowner Admin 11 first person that the system calls. Has the Admin 12; Family Member 2 is registered to Cell phone with no SMS feature option of adding users. Admin 13. When the call button is pressed and Admin 12’s phone number is also registered as a Admin 12 Admin 11 does not answer, this is the Power Admin in order to add users, program & Family Member 1 *Upgraded to second person that the system calls. Has receive confirmations via SMS. Smart phone Power Admin the ability to add users and change ...
-
Page 7: Installation
INSTALLATION SIM CARD INSTALLATION STEP 1. Face the panel so the SIM card tray is on the bottom left corner. STEP 2. Flip up SIM card tray door. Slide SIM card tray door left to unlock the tray. STEP 3. Insert SIM card into tray door with notched side of SIM card STEP 4. Gently push down to close tray door and pay careful facing up and metal contacts on SIM card facing left. attention to notch of SIM card. STEP 5. Slide tray door to the right in order to lock SIM card STEP 6. Test system by powering on. A trouble beep will sound into place. A “click” sound will indicate the tray door is locked. if the SIM card is installed incorrectly. GSM SIM Card Reminder: As a reminder, please make sure you understand your Terms of Service with your GSM provider. The door entry system will not work without a valid GSM SIM card. Works well with prepaid cards or subscription based cellular services using GSM only. ... -
Page 8: System Installation
SYSTEM INSTALLATION The system can be installed either on a surface (Fig. 2) or recessed (Fig. 4). ADVISORY: Light gauge is recommended (22ga stranded) for wiring unit’s open command. Seal unit with silicone sealant paying careful attention to metal housing. Do not use silicon sealant on plastic housing or cover. Be very careful with antenna when installing cover. Tape antenna connections with electrical tape. Do not pinch antenna cable when installing cover. Do not use near sprinkler system. Disconnect power when servicing equipment. If the system is constantly emitting a tone during installation, it’s a sign that there is poor reception in the area. To remedy the situation move the cellular antenna until the module stops emitting a tone. NOTE: Before surface mounted installation, please remove the plastic back cover (Fig. 1) before fitting panel into the stainless steel panel housing. NOTE: Before recessed mounted installation, please KEEP the plastic back cover (Fig. 3) attached to the panel. WIRING DIAGRAM 4 Band GSM (900/1800/850/1900MHZ) Wireless Module MC55i Terminal Made by Cinterion Made in Germany ... -
Page 9: Wiring Locks
WIRING LOCKS Depending on lock installed, the power can be sourced from the existing 12V DC 1.5A power supply or supplied separately using external power supply. Please be advised when sourcing power from door system, it should match required voltage with lock being installed. It is advised to install a separate external power supply for locks. WIRING LOCKS USING “SYSTEM” POWER SUPPLY WIRING LOCKS USING “EXTERNAL” POWER SUPPLY For Battery Backup recommendation, see page 17‐18 or visit www.sentryus.com/module.php. For reference of a Typical Lock Power Consumption, see page 13. ... -
Page 10: Led Indicators
LED INDICATORS LED Status Indicator LED Network Indicator LED Power Indicator Red Flashing = Standby Red flashes once per 3 seconds = Ready Red Solid = Power On Red Solid = Using Red flashes once per second = Searching Red Off = Power Off Red Solid = Busy ADDING ADMINS & USERS ADDING ADMINS The system has the ability to store one (1) Power Admin and three (3) Admins, where the Power Admin is an upgraded status for SMS programming and confirmation. Note: An Admin must be added into the system before adding users or changing settings. One of the Admins must be used to be upgraded to a Power Admin. When registering a user for dialing in, the owner has to add the country code “1” before the phone number. The default Passcode is 1234. Use your cell phone to dial into the system by entering the phone number of the SIM Card installed in the system. You will hear a long tone when the door system answers the call. To add first Admin, enter: 12 1234 # 11 1phonenumber # To add a second Admin, enter: 12 1234 # 12 1phonenumber # ... -
Page 11: Changing Passcodes & Codes
To add User 20, enter: 12 1234 # 72 20 1phonenumber # To add User 100, enter: 1234 # 72 100 1phonenumber # To delete a User, enter: 1234 # 73 usernumber 1phonenumber # To delete all Users, enter: 12 1234 # 73 # Example 3: An Admin wants to program User 2 into the system. His phone number is 999‐888‐4321. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Enter Program Admin Passcode End Passcode Function Code User Number Country Code + Telephone Number End Mode ... -
Page 12: Remote Unlock
REMOTE UNLOCK The default Relay Hold & Release Code is 5678. Use your cell phone to dial into the system by entering the phone number of the SIM Card installed in the system. The system will then verify your phone number with the predefined numbers. You will hear a long tone when the door system answers the call. To have Admin Call in to Unlock: Momentary (Trigger Relay), enter: 33 # Admin can call into the system to unlock the door only once. To have Admin Call in to Unlock: Unlimited (Relay Hold), enter: 34 # Admin can call into the system to unlock the door more than once – unlimited. To have Admin Call in to Lock (Relay Release), enter: 35 # Admin can call into the system to lock the door. ADJUSTMENTS To adjust Speaker Volume, enter: ... -
Page 13: Factory Default Reset
To check Minutes/Balance Status on SIM Card, enter: 23 # Feature may not work in United States. To Add Check Balance Code, enter: 78 xxxxxxx # Enter code for SMS check balance from service provider (related to check minutes/balance status on SIM card). *Must change to Check Balance Code of Service Provider. For a chart of the important programming key codes, see page 14. FACTORY DEFAULT RESET If performing a “reset to factory default” is necessary, make sure to record all settings and phone numbers of admin and users. Once hard reset is performed, all phone numbers and settings are erased and must be reprogrammed into the system again. 1234 # 999 # To Reset, enter: FOR REFERENCE ONLY ... - Page 14 Copyright © 2012 by Sentry US. ...
-
Page 15: Specifications
Faceplate Dimension (L x W x H) 6.69” x 3.94” / 170mm x 100mm Module Housing Dimension 6.85” x 4.44” x 2.56” / 174mm x 113mm x 65mm (L x W x H) 1.14” x 0.7” / 29 x 17 mm Antenna Dimension (DIA‐base x H) Lead Length: Approx. 9.84ft / 3m *Specifications are subject to change without notice. TROUBLESHOOTING If a constant beep occurs when the system is initialized, the following components will need to be checked: SIM Card: Please check to see if the SIM card is fitted properly into the door of the SIM card holder and locked properly. Antenna: Please make sure the antenna is installed properly and positioned in a location that receives GSM signal. Also make sure the antenna lead is not broken. Sentry US Technical Support Line: 1‐800‐872‐9907 Mon.‐Fri. 9am – 5pm PST LIMITED ONE (1) YEAR WARRANTY AND EXCLUSIONS Manufacturer warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Manufacturer is free of defects in materials and workmanship under normal and proper use for one (1) year from the purchase date. Manufacturer's only obligation is to correct such defects by repair or replacement, at its option, if within such one (1) year period the product is returned prepaid, with proof of purchase date, and a description of the problem. This warrant excludes and there is disclaimed liability for labor for removal of this product or reinstallation. Warranty is voided if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other implied warranties of any kind, including merchantability and fitness or a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warrant, including merchantability and fitness of or a particular purpose, is limited to one (1) year. Manufacturer is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, loss sales or profits or delay or failure to perform this warranty obligation. The remedies, provided therein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise. For damage requiring service, ... - Page 16 ...
-
Page 17: Optional Accessories
OPTIONAL ACCESSORIES Outdoor Housing Option 1 Outdoor Housing Option 2 DE‐H1 DE‐H2 (for use with Access Control Keypad or Camera) Examples: Example: Accessories for using GSM‐DE3100 system with DE‐H2 housing: Stand‐Alone Access Control Keypad RFID EM Keyfob ** Proximity Clamshell ID Analog Pinhole Camera with Built‐in EM Reader ** ACC‐EMTAG‐B Access Card ** ... - Page 18 Security Alert System ‐ Relay and Module 16.5V AC 1.5A Battery Power Charger 24V AC 7A Battery Power Charger High Voltage Relay MD‐BPC612 MD‐BPC61224 MD‐HVR 4 Channel Recordable Siren & Voice 8 Channel Recordable Voice Annunciator 365 Days Schedule Timer Annunciator Module Module MD‐T365 MD‐SVOICE4 MD‐VOICE8 www.SentryUS.com Additional Technology Security Inc. dba: Sentry US 5500 Stewart Avenue Fremont, CA 94538 E‐mail: info@SentryUS.com Tel: 1‐800‐916‐8783 ...