Adjusting The Volume Balance Among The Keyboard Playing, Ensemble Sound, And Software Playback - Yamaha Disklavier E3 Operation Manual

Chapter
4
Advanced Song Playback
■ Cancelling the Pedal Part
1
On the part cancellation screen, press [
2
Press [–/NO] to cancel a pedal part.
3
To replay the pedal part, press [+/YES] with the cursor is
on "P=."
4
Press [BACK] to return to the song playback screen.
Adjusting the Volume Balance among the Keyboard Playing,
Ensemble Sound, and Software Playback
[BALANCE]
Besides adjusting the overall volume, the volume balance among the
different sound sources as described below can be adjustable.
TG: Adjusts the volume of the ensemble sound reproduced by the
tone generator (TG) of the Disklavier.
Audio: Adjusts the volume of the accompaniment or standard audio
sound pre-recorded in the software (CDs).
Voice: Adjusts the volume of the ensemble voice when you play using
the voice function.
32
=Piano Part=
L=ON R=OFF P=ON
=Piano Part= L/R
L=ON R=OFF P=OFF
Piano Part L/R
=ON R=OFF P=ON
] to select "P=."
L/R
Note:
You cannot adjust the volume
balance during the DisklavierRadio
playback.

See Chapter 5 "Advanced Piano
Playing – Playing the Disklavier
with an Ensemble Voice" on
page 44.