Repeating Song Playback - Yamaha Disklavier E3 Operation Manual

1
Press [TRANSPOSE –] or [TRANSPOSE +] on the remote
control.
The transposition setting screen appears.
2
Press [TRANSPOSE –] or [TRANSPOSE +] to change the
key.
Playback can be transposed in half-step increments up or down
two octaves (–24 key to +24 key).
Press [TRANSPOSE 0] to set to the original key.

Repeating Song Playback

[REPEAT]
There are three repeat modes (ALL, RPT, RND) as described below. You
can use these functions for entertainment or study purpose.
Repeat mode settings remain in effect until recording is started, another
medium or album is selected, or the Disklavier is tuned off.
1
Press [REPEAT] on the remote control.
The repeat setting screen appears.
=Memory=
REPEAT ALL
2
Press [REPEAT] to select repeat modes.
The following options are available:
Option Description
ALL Repeats all songs on the selected album.
RPT Repeats selected song.
RND Shuffles the order of songs on the selected album and
repeats the cycle.
OFF
Plays back songs normally.
=Memory= TRANS-/0/+
TRANS +01key
REPEAT
Advanced Song Playback
Note:
You can also use the dial on the
control unit to adjust the key.
Chapter
4
29