* Rx. NRPN is set to OFF by power-on reset or by "Turn General MIDI System On," and it is set to ON by "GS RESET."
40 1x 0B
00 00 01
00 - 01
40 1x 0C
00 00 01
00 - 01
40 1x 0D
00 00 01
00 - 01
40 1x 0E
00 00 01
00 - 01
40 1x 0F
00 00 01
00 - 01
40 1x 10
00 00 01
00 - 01
40 1x 11
00 00 01
00 - 01
40 1x 12
00 00 01
00 - 01
40 1x 13
00 00 01
00 - 01
40 1x 14
00 00 01
00 - 02
ASSIGN MODE is a parameter used to select the voice assign manner when "Multiple Note Ons" occur (the same note number on the same channel at the same
time).
The best assign modes (SINGLE (0) for the Drum part and LIMITED-MULTI (1) for the other parts) are selected automatically, so you need not reset this parameter.
40 1x 15
00 00 01
00 - 02
USE FOR DRUM PART is a parameter to define the part to be used as an ordinary part (0), as a drum part using DRUM MAP1 (1), or a drum part using DRUM
MAP2 (2).
The default is MAP1 (1) for Part 10 (MIDI CH=10, x=0), and all other parts are set to ordinary parts (OFF(0)).
40 1x 16
00 00 01
28 - 58
40 1x 17
00 00 02
08 - F8
40 1x 18#
40 1x 19
00 00 01
00 - 7F
40 1x 1A
00 00 01
00 - 7F
40 1x 1B
00 00 01
00 - 7F
40 1x 1C
00 00 01
00 - 7F
40 1x 1D
00 00 01
00 - 7F
40 1x 1E
00 00 01
00 - 7F
40 1x 1F
00 00 01
00 - 5F
40 1x 20
00 00 01
00 - 5F
40 1x 21
00 00 01
00 - 7F
40 1x 22
00 00 01
00 - 7F
40 1x 23
00 00 01
00 - 01
*Rx. BANK SELECT is set to ON by power-on reset or by "GS RESET," and set to OFF by "Turn General MIDI System On."