Roland SCB-55 Owner's Manual page 12

All Sounds Off
All Notes Off
Reset All Controllers
* Parameter values set with RPN and NRPN will not change even if a Reset All Controllers
Active Sensing Messages
System Exclusive Messages
•GM System On (Universal Non-Realtime System Exclusive)
•GS Reset (GS Format Common System Exclusive)
12
This message turns off all sounds which are currently playing. The sounds in the corre-
sponding channel will be turned off.
This message turns all 'note on' messages to 'note off' messages. However, if hold 1 or
sostenuto is turned on, the sound will not stop until these are turned off.
When this message is received, the controllers will be set as follows:
Pitch bend change
Polyphonic key pressure 0 (min.)
Channel pressure
Modulation
Expression
Hold 1
Portamento
Soft
Sostenuto
RPN
NRPN
is received.
These messages monitor the integrity of MIDI connections. When the MIDI IN connec-
tor receives Active Sensing messages, it will enter the 'Active Sensing' mode. If Active
Sensing messages (or other MIDI messages) are not received at 420 millisecond
intervals, the device will judge that a cable is disconnected or there is a damaged
connection. All sounds will be cut off, and a Reset All Controllers message will be
processed. Monitoring for Active Sensing messages is terminated.
Exclusive messages are used to control a characteristic operation of the device. Universal
System Exclusive messages can be used for all devices - regardless of the manufacturer.
General Exclusive messages, however cannot convey data between different models.
Roland's Exclusive messages have a unique manufacturer ID, device ID, and model ID
so that the type of data can be determined.
When the 'GM System On' message is received, the unit will be set to correspond with
the General MIDI basic settings. Reception of NRPNs will no longer be allowed after a
'GM System On' has been received.
The 'GM System On' MIDI message is included at the beginning of song data that carries
the GM logo. When the song data is played from the beginning, the device will be auto-
matically initialized to the basic settings.
When the 'GS Reset' message is received, all the GS basic settings are restored on the
unit. When a GS reset is received, the NRPNs specified with the GS Format can be
received.
The GS reset MIDI message is included at the beginning of song data that carries the GS
logo. When the song data is played from the beginning, the device will automatically
be initialized to the basic settings.
+/-0 (median)
0 (min.)
0 (min.)
127 (max.)
0 (off)
0 (off)
0 (off)
0 (off)
No number selected; no change in internal data
No number selected; no change in internal data