Configuring A Remote Gpib Interface - Agilent Technologies Agilent E5810A User Manual

Installing and Configuring the Agilent IO Libraries Suite

Configuring a Remote GPIB Interface

This section shows the steps to configure a remote GPIB interface , which
is a logical interface on the client PC that supports communication with GPIB
instruments on your E5810. If you do not have GPIB instruments connected
to your E5810, but do have an RS-232 instrument connected, skip this
section and go to "Configuring a Remote Serial Interface" on page 69.
Click the Agilent IO Control icon (blue circled IO icon on the Windows
1
taskbar) and click
Expert utility's main window.
Click
2
Add Interface
3 In the
Manually Add an Interface
and click
interface
4 Specify the TCPIP interface that you wish to use to host this remote
interface, in the
TCPIP interface ID:
is already configured on your system; by default, a LAN interface
Chapter 2
Agilent Connection Expert
on the Connection Expert toolbar.
dialog box, select
. The
Add Remote GPIB Interface
field. This must be an interface that
Installing the E5810
to display the Connection
Remote GPIB
dialog will appear.
67