E5810 Current Settings - Agilent Technologies Agilent E5810A User Manual

Using E5810 Web Access
Using the Welcome Page

E5810 Current Settings

The
Current Settings
settings for the E5810. A typical display follows. See "E5810 Configuration
Parameter Descriptions" in this chapter for detailed descriptions.
Hostname
Internet domain name for the E5810 that may
be used to communicate with the E5810. The
Hostname is not a required configuration value.
IP Address
The E5810 IP Address. An IP address is a
32-bit numeric address expressed as four
numbers separated by periods (e.g.,
152.160.10.240).
GPIB SICL Interface Name
Each GPIB interface used by Agilent VISA
or SICL must have a SICL Interface Name.
For VXI-11 protocol, use "gpib0".
RS-232 SICL Interface Name
"COM1" is the default value. Client SICL
applications will use full SICL name of
"COM1,488".
Firmware Revision
Current firmware revision on this E5810.
See "Updating E5810 Firmware" for
information on upgrading E5810 firmware.
80
part of the page displays some of the current
Welcome
Ethernet (MAC) Address
A unique address assigned by the manufacturer
for each Internet device. The Ethernet address
is on a label on the underside of the E5810.
Serial Number
Unique serial number for this E5810, located
on a label on the underside of the E5810.
Chapter 3