Timer Programming - Panasonic TH-P50ST60A Quick Manual

2) Select the favourite with
– To list favourite channels, set
Watching
To view more details of the programme (Digital TV)
●
1) Select the programme with
2) Press INFO to view
– Press again to return to TV Guide.
To exit TV Guide
●
EXIT
= Note =
When this TV is turned on for the first time, or the TV is switched off for
●
more than a week, it may take some time before TV Guide is completely
shown.
Digital TV and Analogue TV channels are displayed on the same TV Guide
●
screen. D means Digital TV channel and
There will be no programme listings for Analogue channels.

Timer Programming

The Timer Programming menu allows you to choose programmes that you
want to remind watching or record to the USB HDD. At the correct time, the
TV will tune to the correct channel even if the TV is in Standby mode.
1. Select the forthcoming programme or channel with
press OK to access
2. Select USB HDD Rec.
To check / change / cancel a timer programming event
●
Recording
LED will turn to orange in Standby mode if
●
To return to TV Guide
●
RETURN
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
record from the time you finish the timer programming event setting.
= Note =
Not valid in Analogue TV
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
/ and press
Favourites
Tuning and editing channels
/ /
/ Reminder with
Timer Programming
with / and press
only works reliably if correct time information is
- 35 -
OK to view
Edit.
Favourites Edit
/
A means Analogue TV channel.
/ /
/ and press OK to set
Editing timer programming
Timer Programming
OK to set USB HDD Rec.
/ and
is set.
to