Watching External Input - Panasonic TH-P50ST60A Quick Manual

= Note =
It is recommended to connect the devices to the TV's USB ports directly.
●
You cannot use two or more of the same kind of USB devices
●
simultaneously except USB Flash Memory or USB HDD.
Use USB 2 port for connecting the USB HDD.
●
Use USB 1 port for connecting the Communication Camera.
●
Some USB devices or USB HUB may not be used with this TV.
●
You cannot connect any devices by using USB card reader.
●
Additional information for the devices may be on the following website.
●
(English only)
http://panasonic.net/viera/support
■
To listen with speakers
DIGITAL AUDIO OUT
Optical digital audio cable
Amplifier with speaker system
To enjoy the sound from the external equipment in multi-channel sound
●
(e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For the
connections, read the manuals of the equipment and amplifier.

Watching external input

Connect the external equipment (VCRs, DVD equipment, etc.) and you can
watch through the input.
1. Display the input selection menu with
2. Select the input mode connected to the equipment with
OK to watch (The selected mode is displayed on the top left of the screen)
You can also select the input pressing
●
INPUT/OK/HOLD for MENU button on the control panel of the TV. Press
repeatedly until the desired input is selected.
To switch between
●
You can label or skip each input mode. Skipped inputs will not be
●
displayed when AV
Settings
The remote control is capable of operating the contents or external
●
COMPONENT and
is pressed. (Input
Setup Display Settings
- 23 -
AV
AV on the remote control or
VIDEO in AV, select with
Labels)
/ and press
/ .