Entering And Exiting Program Mode - ADC PHASE 6 OPL User Manual

Entering and Exiting Program Mode

0 0 0
Preprogrammed cycle
to be changed
Enter program to be
changed by pressing
appropriate key.
To exit program mode.
REAdY
To enter program mode, press the "ENTER/
START"
the "0" Key three (3) times within two (2)
seconds.
PROGRM
Program Mode
B
Auto
Last Parameter Changed
A 05
b 75
PROGRM
REAdY
29
Key once, and immediately press
I
System parameter program
location to be changed
The ENTER/START
Key scrolls through the
parameters the "0" Key
Toggles the parameter
selections and the
ENTER/START
I
locks them into the
program.
To procede to next
program to be changed.
To exit program mode.
I
Key