Maxtor Shared Storage Plus+ User Manual page 64

10. When the drive has finished formatting, you will see a message that the
USB drive has been successfully formatted.
11. Click Done to return to the Configure Your USB Devices page.
Printer Support Management:
1. Click Printer Support Management.
2. You will see the current status of your printer support. It will be Enabled
or Disabled.
3. Depending on the state, the button on the screen will read to opposite.
62
4. If the printer support is disabled and you want to enable it, click Enable.
5. You will see a message stating that the Printer Support is enabled.
6. Click Done to return to the Configure Your USB Devices page.
7. If Printer Support is enabled and you want to disable it, click Disable.