Table of Contents
Advertisement
Instructions for use
GB
English,1
WMFL 833
FUTURA
WASHING MACHINE
Contents
Installation, 2-3-4-5
Connecting the electricity and water supplies
Cutting off the water or electricity supply
Wash cycles, 10
Table of wash cycles
Personalisation, 11
Troubleshooting, 13-14
Assistance, 15-16
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint Futura WMFL 833
Summary of Contents for Hotpoint Futura WMFL 833
-
Page 1: Table Of Contents
Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal WMFL 833 Opening the porthole door manually Description of the washing machine and starting a wash cycle, 8-9 Control panel Indicator lights... -
Page 2: Installation
Installation ! Keep this instruction manual in a safe place ning the adjustable front feet (see figure); the for future reference. Should the appliance be angle of inclination, measured according to the worktop, must not exceed 2°. sold, transferred or moved, make sure the Levelling your appliance correctly will provide instruction manual accompanies the washing it with stability and avoid any vibrations, noise... -
Page 3: Connecting The Drain Hose
Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without ben- • the socket is compatible with the washing ding it, to a draining machine’s plug. -
Page 4: The First Wash Cycle
As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &... -
Page 5: Technical Data
Technical data Model WMFL 833 width 59.5 cm Dimensions height 85 cm depth 60.5 cm Capacity from 1 to 8 kg please refer to the technical Electrical data plate fixed to the ma- connections chine maximum pressure 1 MPa (10 bar) -
Page 6: Care And Maintenance
Care and maintenance Cutting off the water and electri- To access the pre-chamber: city supplies 1. using a screwdri- ver, remove the cover • Turn off the water tap after every wash cycle. panel on the lower This will limit wear on the hydraulic system in- front part of the wa- side the washing machine and help to prevent shing machine (see... -
Page 7: Precautions And Tips
Precautions and tips Opening the porthole door manually This washing machine was designed and constructed in accordance with international safety regulations. The fol- In the event that it is not possible to open the porthole lowing information is provided for safety reasons and must door due to a powercut, and if you wish to remove the therefore be read carefully. -
Page 8: Description Of The Washing Machine And Starting A Wash Cycle
Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights SPIN SPEED knob DOOR ON/OFF button LOCKED TEMPERATURE indicator light knob START/PAUSE button with indicator light FUNCTION Detergent dispenser drawer buttons with indicator lights WASH CYCLE knob Detergent dispenser drawer: used to dispense... -
Page 9: Indicator Lights
Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any The indicator lights provide important information. damage, wait for the indicator light to switch off before you This is what they can tell you: open the appliance door. -
Page 10: Wash Cycles
Wash cycles Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) CLEAN Plus 1 Anti Stain 40° 1300 180’ 2 Whites 60° 1300 180’ 60° 1.09 200’ Cotton Standard 60° (1): heavily soiled whites and resistant colours. 1300 ... -
Page 11: Personalisation
Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. -
Page 12: Detergents And Laundry
Detergents and laundry Detergent dispenser drawer Cotton Standard 20°: use this cycle 5 for heavily soiled cotton loads. The effective performance levels achieved at Successful washing results also depend on the correct cold temperatures, which are comparable to washing at dose of detergent: adding too much detergent will not 40°, are guaranteed by a mechanical action which opera- necessarily result in a more efficient wash, and may in fact... -
Page 13: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Possible causes / Solutions: Problem: • The appliance is not plugged into the socket fully, or not enough to make contact. The machine does not switch on. - Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 15: Assistance
Assistance Guarantee 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. -
Page 16: After Sales Service
UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB Indesit Company Unit 49 Airways Industrial Estate,Dublin 17 Recycling & Disposal Information As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality, recycled components to keep down customer costs and minimise material wastage.