Table of Contents
Advertisement
Instructions for use
GB
English, 1
WMF 945 P/G/A/K
Contents
Installation, 2-3-4-5
Connecting the electricity and water supplies
Wash cycles, 8
Table of wash cycles
Cutting off the water or electricity supply
Troubleshooting, 13-14
Assistance, 15-16
WASHING MACHINE
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint WMF 945 P
Summary of Contents for Hotpoint WMF 945 P
-
Page 1: Table Of Contents
Indicator lights Starting a wash cycle Wash cycles, 8 Table of wash cycles Personalisation, 9 Setting the temperature WMF 945 P/G/A/K Setting the spin speed Functions Detergents and laundry, 10 Detergent dispenser drawer Preparing the laundry Garments requiring special care... -
Page 2: Unpacking And Levelling
Installation 2. If the floor is not perfectly level, compensate for any Keep this instruction manual in a safe place for future unevenness by tightening or loosening the adjustable reference. Should the appliance be sold, transferred or front feet (see figure); the angle of inclination, measu- moved, make sure the instruction manual accompanies the red according to the worktop, must not exceed 2°. -
Page 3: Electric Connection
Connecting the drain hose • the supply voltage is included within the values indica- ted on the Technical details table (see page 5); Connect the drain hose, without bending it, to a • the socket is compatible with the washing machine’s plug. draining duct or a wall If this is not the case, replace the socket or the plug. -
Page 4: The First Wash Cycle
As the colours of the wires in the lead may not corre- Warning! The company denies all liability if and when spond with the coloured markings identifyng the termi- these norms are not respected. nals in your plug, proceed as follows: The first wash cycle Connect Green &... -
Page 5: Technical Data
Technical data Model WMF 945 P/G/A/K width 59.5 cm Dimensions height 85 cm depth 60 cm Capacity from 1 to 8 kg Electrical please refer to the technical data plate fixed to the machine connections maximum pressure 1 MPa (10 bar) Water connections minimum pressure 0.05 MPa (0.5 bar) -
Page 6: Description Of The Washing Machine And Starting A Wash Cycle
Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights DISPLAY DOOR ON/OFF TEMPERATURE LOCKED button with indicator button light indicator light START/PAUSE button with SPIN SPEED FUNCTION Detergent dispenser drawer indicator light button buttons with indicator lights... -
Page 7: Indicator Lights
Indicator lights Temperature indicator light When a temperature value is selected, the correspon- ding indicator light will illuminate. The indicator lights provide important information. This is what they can tell you: Wash cycle phase indicator lights As the WASH CYCLE knob is rotated, the indicator lights illuminate, indicating the stages which will be performed Spin indicator light by the machine in accordance with the selected wash... -
Page 8: Wash Cycles
Wash cycles Table of wash cycles Max. Max. Detergents load load Max. Max. Cycle (kg) (kg) Description of the wash cycle temp. speed duration (°C) (rpm) Fabric Mini Wash Normal softener load Essentials cycles Cottons: extremely soiled whites. 90° 1400 ... -
Page 9: Personalisation
Personalisation Setting the temperature By pressing the TEMPERATURE button to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. -
Page 10: Detergents And Laundry
Detergents and laundry Garments requiring special care Detergent dispenser drawer Baby cycle: this wash cycle 6 can be used to remove the Good washing results also depend on the correct dose soiling typically caused by babies, while ensuring that all of detergent: adding too much detergent will not neces- detergent is removed from nappies in order to prevent sarily result in a more efficient wash, and may in fact a... -
Page 11: Precautions And Tips
Precautions and tips The crossed out “wheeled bin” symbol on the product This washing machine was designed and constructed reminds you of your obligation, that when you dispose in accordance with international safety regulations. The of the appliance it must be separately collected. Con- following information is provided for safety reasons and sumers should contact their local authority or retailer must therefore be read carefully. -
Page 12: Care And Maintenance
Care and maintenance Cutting off the water and electricity sup- Cleaning the pump plies The washing machine is fitted with a self-cleaning pump • Turn off the water tap after every wash cycle. This will which does not require any maintenance. Sometimes, limit wear on the hydraulic system inside the washing small items (such as coins or buttons) may fall into the machine and help to prevent leaks. -
Page 13: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. - Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 15: Assistance
Assistance Guarantee 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. -
Page 16: After Sales Service
UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB Indesit Company Unit 49 Airways Industrial Estate,Dublin 17 Recycling & Disposal Information As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality, recycled components to keep down customer costs and minimise material wastage.