Clear Cmos: Clr_Cmos; Clear Password: Clr_Pswd - Fujitsu AD11 Manual

AD11 Mainboard Manual

Clear CMOS: CLR_CMOS

The jumper allows you to enable or to disable the password setting. You may
need to adjust it if you forget your password. To clear the password setting:
(1).Turn off your computer, (2). Enable this feature by setting it at Enable, (3).
Turn on your computer to boot screen, (4). Turn off your computer, (5).
Disablethe Clear Password feature by setting at Disble, (6). Turn on your
computer. Press Delete key to load setup default values.

Clear Password: CLR_PSWD

This jumper allows you to enable or to disable the password configuration.
You may need to enable this jumper by shorting it with a jumper cap if you
forget your password. To clear the password setting: (1). Turn off your com-
puter, (2). Short this jumper by placing a jumper cap on it; (3). Turn on your
computer, (4). Hold down the Delete key during boot and enter BIOS Setup to
re-enter user preferences, (5). Turn off your computer, (6). Remove the jumper
cap, (7). Turn on your computer for the new settings to take effect.
2 - 8