Assembling The Blades - Hunter Type 2 X-Board 20727 Owner's Manual And Installation Manual

6-1. Attach each blade to a blade iron using four blade assembly
screws and four acorn nuts. Securely tighten each nut to the blade
using a 3/8 in. wrench.
6-2. For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
Blade
Mounting
Screw
Acorn Nut
6 • Assembling the Blades
Step 6-2
Blade
Mounting
Screws
42663-01 • 05/24/12 • Hunter Fan Company
Acorn Nuts
9
Blade Assembly
Screw
Blade Assembly
Screws
Step 6-1