Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
X-Board
__________________________________________
Model Name
__________________________________________
20727
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42663-01
20081023
©2008 Hunter Fan Co.
Model Type 2
Model Type 2
Model Type 2
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter X-BOARD 20727
Summary of Contents for Hunter X-BOARD 20727
- Page 1 __________________________________________ X-Board Model Name __________________________________________ 20727 Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42663-01 20081023 ©2008 Hunter Fan Co. Model Type 2 Model Type 2 Model Type 2 Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
8 • Operating and Cleaning Your Ceiling Fan ......13 9 • Troubleshooting ....14 ©... - Page 3 Understanding Mounting and Installer’ s Choice® Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for both Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 42663-01 • 10/23/08 • Hunter Fan Company For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. -
Page 6: Assembling And Hanging The Fan
Once assembled, do not remove the downrod. 3-4. Raise the fan and align the slots in the canopy with the hooks on the ceiling plate. 3-5. Place the slots over the hooks to hang the fan. -
Page 7: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42663-01 • 10/23/08 • Hunter Fan Company 4 • Wiring the Fan 4 • Wiring the Fan... -
Page 8: Installing The Canopy And Canopy
Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots in the canopy must remain engaged while swinging the canopy for alignment. -
Page 9: Assembling The Blades
Securely tighten each nut to the blade using a 3/8 in. wrench. 6-2. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws. Step 6-2... -
Page 10: Completing Your Installation With A Bowl Light Fixture
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate. - Page 11 CAUTION: Make sure the light kit is securely attached to the upper switch housing. Failure to properly attach and tighten all three assembly screws could result in the switch housing and light fixture falling. 42663-01 • 10/23/08 • Hunter Fan Company Plug Connectors Light...
- Page 12 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 42663-01 • 10/23/08 • Hunter Fan Company Light Bulbs (B10 Candelabra Base 40 Watt...
-
Page 13: Fan
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. -
Page 14: Troubleshooting
2. Check to see if the blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws.