How The Hepatech ® System Works; Operating Your Air Purifier - Hunter HEPAtech 30772 Owner's Manual

5. Place the bottom of the grill back into the
indention in the base and push the door
back into place.
6. Plug the unit into a 120V electrical outlet.
HOW THE HEPATECH
Figure 2.
Ionizer
Dust and other irritants are pulled into the air
purification system by the fan. The carbon
pre-filter attracts larger particles like, pet
dander, hair, and odor causing particles
and traps them on the pre-filter. Smaller
particles such as dust, mold, and pollen pass
through the pre-filter and are captured by the
HEPAtech filter. Up to 99.97% of particles
®
as small as .1 microns can be captured.
The ionizer charges any remaining particles
causing them to clump together and fall to the
floor or surface where they can be removed
by cleaning. Clean, purified air is then
released into the room through the side grill.
(Figure 2.)
4
SYSTEM WORKS
®
Front
HEPAtech®
Filter
Pre-Filter
43083-01 11/21/2011

OPERATING YOUR AIR PURIFIER

On/Speed Control: Rotate the Speed
Control knob to set the desired speed.
Grill
The fan speed can be adjusted at any time.
While the unit is running, the light ring will
glow to indicate the unit is on.
Press the Ionizer button to turn on the Ionizer
function of your air purifier. The Ionizer light
will illuminate while the ionizer is active.
Figure 3.
Ionizer
Light
On/Off
Light
Ring
Pre-Filter
Calendar
NOTE: DO NOT run the ionizer if tobacco
smoke, air fresheners, dripless wax candles,
or grease from cooking is present.
Unit off
Low speed - Recommended for
use when soft background noise
is unwanted.
Medium speed - Typical usage setting.
Soft background noise is not an issue.
High speed - Use when quick, efficient
results to a room's air quality are
desired.
Ionizer
Button
Filter
Calendar
On/Off
Speed
Control