Supero SUPER STORAGE SYSTEM 6027R-E1R12N User Manual page 90

S S S
UPER TORAGE YSTEM 6027R-E1R12N User's Manual
Aggressive Link Power Management
Select Enabled to enable Aggressive Link Power Management support
for Cougar Point B0 stepping and beyond. The options are Enabled and
Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for a particular port, which will
allow the user to change a hardware component or device without shutting
down the system. The options are Enabled and Disabled.
Staggered Spin Up
Select Enabled to enable Staggered Spin-up support to prevent
excessive power consumption caused by multiple HDDs spinning-up
simultaneously. The options are Enabled and Disabled.
RAID Mode
The following items are displayed when RAID Mode is selected:
PCH RAID CodeBase
Select Intel or LSI to specify the code base to be used for RAID support.
The options are Intel and LSI.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The
options are Enabled and Disabled.
SAS Confi guration
OnChip SAS Oprom
Select Enabled to support the onboard SAS Option ROM to boot up the system via
a storage device. The options are Disabled and Enabled.
SAS Option ROM Codebase
Select Intel to use the Intel SAS controller to support onboard SAS Option ROM.
Select LSI to use the LSI SAS controller to support onboard SAS Option ROM.
The options are Intel and LSI.
Device0~Device7: The AMI BIOS will automatically detect the onboard SAS devices
and display the status of each SAS device as detected.
7-16