Supero SUPER STORAGE SYSTEM 6027R-E1R12N User Manual page 88

S S S
UPER TORAGE YSTEM 6027R-E1R12N User's Manual
DRAM RAPL
This item allows the user to select the average power limit setting when a DRAM
module is in operation. The options are Disabled, Mode 0, and Mode 1.
Device Tagging
Select Enabled to support device tagging. The options are Disabled and En-
abled.
Rank Margin
Select Enabled to set the memory rank margin setting. The options are Disabled
and Enabled.
Thermal THrotTling
Throttling improves reliability and reduces power consumption in the proces-
sor via automatic voltage control during processor idle states. The options are
Disabled and CLTT (Closed Loop Thermal Throttling).
Serial Message Debug Level
This feature allows the user to select the serial message debug level. The options
are Minimum, Maximum, Trace, and Memory Training.
South Bridge Confi guration
This feature allows the user to confi gure the settings for the Intel PCH chip.
PCH Information
This feature displays the following PCH information.
Name: This item displays the name of the PCH chip.
Stepping: This item displays the status of the PCH stepping.
USB Devices: This item displays the USB devices detected by the BIOS.
All USB Devices
This feature enables all USB ports/devices. The options are Disabled and Enabled.
(If set to Enabled, EHCI Controller 1 and Controller 2 will appear.)
EHCI Controller 1/EHCI Controller 2 (Available when All USB Devices is set
to Enabled)
Select Enabled to enable Enhanced Host Controller Interface (EHCI) Controller 1/
Controller 2. The options are Disabled and Enabled.
7-14