Setting Up Windows 2000 - Fujitsu DESKPOWER C600 Series User Manual

Important
You need to perform [Run this] to finalize the setup. Be sure to perform the procedure as it is
described here.
12 Click [Perform].
Final setup is performed, and the restart message is displayed.
13 Click [OK].
The PC restarts.
You have completed the Windows setup.

Setting Up Windows 2000

Point
While setting up Windows 2000, you will see a message "The file "xxxxx.xxx" is required from
the Windows 2000 Professional CD-ROM" (where "xxxxx.xxx" is replaced with a file name
such as "courf.fon"). In this case, enter "c:\support\i386" in the [Copy from] field, and press
[OK] to start the setup.
After completing the setup, install Windows 2000 Service Pack2.
1 Turn on the computer.
After a few seconds, [Starting the Windows 2000 Setup Wizard] is displayed.
2 Click [Next].
[License Agreement] is displayed.
This License Agreement describes the agreement for using preinstalled Windows on the
computer.
3 Read the [License Agreement] carefully, and click [I agree], and then [Next].
Point
If you select [I do not agree], click [Next] and follow the instruction message.
4 Enter [Name] and [Organization] and click [Next].
You can skip [Organization].
[Computer name and administrator password] is displayed.
23