Chapter 6
Using EAP Authentication
Step 3
Click OK to begin the authentication process.
Note
If your client adapter authenticates, ASTU and the Link Status field on the ADU Current Status window
show Authenticated. If the authentication attempt fails, ASTU and ADU show Authentication Failed.
Using PEAP (EAP-MSCHAP V2)
After you (or auto profile selection) select a profile that uses PEAP (EAP-MSCHAP V2) authentication
or you eject and reinsert the client adapter, reboot the computer, or log on while this profile is selected,
the EAP authentication process begins automatically. The client adapter should EAP authenticate using
either your Windows credentials or the username and password entered in the Define PEAP
(EAP-MSCHAP V2) Configuration window.
If your client adapter authenticates, ASTU and the Link Status field on the ADU Current Status window
show Authenticated. If the authentication attempt fails, ASTU and ADU show Authentication Failed.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
If the password is invalid or entered incorrectly, the Token Configuration window reappears,
enabling you to re-enter it.
Using PEAP (EAP-MSCHAP V2)
6-9