Canon imagePROGRAF iPF9400S User Manual page 841

iPF9400S
5
Make sure the Ink Lamp is lit in red.
•
If the Ink Lamp is not lit in red, reload the tank.
Note
6
Close the Ink Tank Cover.
•
After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover cannot close, some Ink Tank
Lock Lever may not be closed completely. Make sure all ink tank lock levers are fully closed.
Important
Load the Ink Tank (700 ml)
1
Before opening the pouch, hold the new Ink Tank with both
hands and tilt it to the left and right as shown, shaking gen-
tly it seven or eight times.
•
700 ml ink tanks are heavy, so use your whole arm to agitate it instead of just your wrist. If you agitate it using just
your wrist, you may injure your wrist.
Caution
User's Guide
Replacing Ink Tanks
841