Canon imagePROGRAF iPF9400S User Manual page 556

Specifying the Cutting Method for Rolls
8
Holding the printed document to prevent it from drop-
ping, press the Cut button to cut the roll.
Manual (when using media that cannot be cut with the Cutter Unit)
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Paper tab (
•
Note
2
Press the OK button. The Paper Menu is displayed.
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5
Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6
Press ▲ or ▼ to select Manual, and then press the OK button.
7
When Perform the detection of paper leading edge? is displayed, select Perform(recommend).
556
8
Print the job.
The printer stops advancing the paper after printing.
).
If the Tab Selection screen is not displayed, press the Menu button.
iPF9400S
User's Guide