NETGEAR WN2500RP User Manual page 26

Disable Device's PIN. Selecting this check box disables the extender's PIN. The PIN
-
can be used for a WPS wireless connection.
Keep Existing Wireless Settings. When this check box is selected, the settings in
-
the Wireless Settings screen stay the same when WPS is used for a wireless
connection.
Wireless Card Access List. Specify a list of computers or wireless devices that are
•
allowed to connect to the network. If you use an access list, then computers that are not
on the list are not allowed to join the wireless network.

To set up a wireless card access list:
On the Advanced Wireless Settings screen, click Setup Access List.
1.
The following screen displays:
Select the Turn Access Control On check box.
2.
Add the computers and wireless devices that you want to give access to the network.
3.
Click the Add button for each device.
•
If you are not sure of the MAC address, check the product label.
•
Make sure to add the computer or wireless device that you are currently using to
•
make changes.
Click Apply so that your changes take effect.
4.
Universal Dual Band WiFi Range Extender WN2500RP
Extender Network Settings
26