Status Screen - NETGEAR WN2500RP User Manual

Status Screen

When you connect to http://www.mywifiext.net, after the automatic firmware check, the Status
screen displays. You can also select Status from the menu to display this screen:
This screen shows the current settings and the status of your extender.
You can click Show Statistics to see device performance statistics such as the number of
packets sent and number of packets received for each port. See
The following fields are displayed in the Status screen:
Hardware Version. The hardware version of the extender.
•
Firmware Version. The current firmware version of the extender. If you upgrade the
•
firmware, this field changes.
GUI Language Version. The language version running on the extender. If you upgrade
•
the firmware, this field changes.
Connection Status to Existing Network
Name (SSID). Your extender is set up to connect to this SSID, also called the wireless
•
name.
Connection Status. The status of your wireless connection (connected or disconnected).
•
Link Rate. The actual transmission (Tx) and receive (Rx) link rate in the current wireless
•
connection.
Extender PC Info
MAC Address. The physical address of the extender, as seen from the local area
•
network (LAN).
IP Address. The IP address of the extender. The default is 192.168.1.250.
•
DHCP Server. Identifies the network DHCP server on the wireless network.
•
Universal Dual Band WiFi Range Extender WN2500RP
Extender Network Settings
Show Statistics
20
on page 21.