Table of Contents
Advertisement
CHAPTER 3
•
Under
Shutdown UPS:, select OFF to totally shut
down the UPS once the low battery condition of the
UPS is reached. Select ON in order for the audible
warning sound to continue once the UPS is shut down.
•
Select
Confi rm once the UPS settings are completed.
Once all of these settings are done, click Logout to fi nish
the process.
Confi guring the TGM-100 with the
TGM-HDC
With the IP Address confi gured and the units all connected,
the installer must now confi gure communications between
the TGM-100 and the TGM-HDC.
•
From the TGM-100's Web UI or the TV UI, select the
Installer Settings screen as previously described.
•
Select
Set Up, then Settings.
•
Select
External Storage Settings.
•
Select
Credentials, then Edit.
•
Enter the
IP Address found on the Display Window
found on the front of the TGM-HDC, followed by the
Admin User Name (admin) and the Admin Password
(en91n3). Use no spaces and separate each with a
comma. For example: 192.168.0.198,admin,en91n3.
32
•
For systems with multiple TGM-HDC iSCSI
devices, use a semicolon without spaces
between the credentials of each device. For
example: 192.168.0.198,admin,en91n3;
192.168.0.199,admin,en91n3;
192.168.0.200,admin,en91n3;
192.168.0.201,admin,en91n3
•
Once the Credentials are entered correctly, select
OOK.
Resetting the System
Should you decide you want to remove all the media from
your TGM-100's external storage device, or to revert all
settings to their factory defaults, you can do so via the
System Information screen.
•
Navigate to the
Admin UI as described previously.
•
Select
System Information.
The System Information screen will be displayed:
•
Press
M Reset System.
The Reset System screen will be displayed.
Installation Manual
Advertisement
Table of Contents
