Table of Contents
Advertisement
•
Write down the
IP Address from the Assigned
Ethernet Settings screen.
•
Open a web browser on the PC that is connected to
the network where the TGM-100 resides.
•
Type the IP address from the TGM-100 into the web
browser. For example: 192.168.0.39.
•
You may now view and control all functions of the
TGM-100 via the home computer.
•
There are three different Web UIs that may be accessed:
•
The
Touch Panel UI (ex. 192.168.0.39) shown above.
•
The
TV UI (ex. 192.168.0.39/tv).
•
The
Admin UI (ex. 192.168.0.39/admin)
Installation Manual
Most actions will be performed using the TV UI (on the
Main TV dispaly) or the Admin UI (on the Web UI or the
Main TV display). The Web version of the Touch Panel UI
is primarily accessed when using ELAN wireless touch
panels.
Accessing Installer Settings Through
the Web UI
Once the IP Address is known and you are able to access
the TGM-100's Web UI, it is possible to access the Install-
er Settings menu via the home PC.
•
Open a web browser as previously described.
•
Enter the IP Address of the TGM-100 with the addition
of /admin. For example: 192.168.0.39/admin.
•
The Admin UI is now available for use. All installer
settings are available from this UI, as well as all User
settings and all functionality of the unit.
Connecting Clients
•
Acces the Admin UI as previously described.
•
On the TGM-100 Server, navigate to
Settings.
•
Select
Network Playback Confi guration.
CHAPTER 3
Setup ->
29
Advertisement
Table of Contents
