Store Button - DigiTech Vocalist Live FX Owner's Manual

Note: Whenever the Aux In jack is connected to an audio source, it will
be used for Live Adapt features instead of the internal microphone. See
"Live Adapt" on page 15
4.
Signal LED
This LED lights when the mic input signal is detected. This LED will light
green when a signal is present, yellow when approaching the A/D limiting
point, and red when limiting occurs. Good practice is to set the microphone
Input Gain knob so the Signal LED lights green regularly, lights yellow
occasionally, but never lights red.
Note: The Signal LED may also light red if the outputs clip due to
the added gain from multiple enabled effects. If such a condition is
encountered, simply lower the Input Gain knob on the back panel until
the Signal LED no longer indicates clipping.
5.
DATA Encoder
This encoder is used to navigate menus and edit certain parameters.
Pressing this encoder selects different pages within the Gold Channel and
System Edit menus.
6.

Store Button

When pressed, this button initiates the preset store and copy functions.
When a preset is edited, this button will light, indicating a change has been
made to the currently loaded preset's stored settings.
7.
System Button
This button enters the System Edit menu, where you can edit Live FX global
system parameters for configuring the Live FX for your application.
8.
Sound Check Button
This button enables and disables the Sound Check feature. Sound Check
allows you to record a vocal loop which can then be used for auditioning
and editing effect parameters.
9.
Edit Knobs
These four knobs are used to edit the
various effect and system parameters. They
correspond to the available on-screen
parameters as shown in the illustration to
the right.
10.
A/B Footswitch
The Live FX allows you to store two parts per preset: "A" and "B". Vocal
effects can be independently enabled or disabled in each part. The A/B
footswitch then allows you to toggle between these A/B parts. This feature
can be helpful for applying dynamic effects within a song without having to
navigate presets, such as enabling delays or distortion effects on certain
words or vocal phrases. This A/B footswitch can be programmed in the
System Edit menu for toggle, momentary, or automatic operation (see "A/B
Footswitch Configuration" on page 28).
4
Gold Channel
1/3
(Push)
WARMTH
20
Edit 1 Edit 2
Knob Knob
Owner's Manual
TYPE
Standard
COMP CORRECT AMBNCE
15 50 35
Edit 3 Edit 4
Knob Knob