HP ProLiant DL580 Quickspecs page 50

QuickSpecs
Power Specifications
Table 2 outlines the power redundancy behavior of the DL580 G5 when this option is set in RBSU. Customers interested in this option
need to first consult the Active Answers Power Calculator to confirm their power is redundant with their system configuration.
Power Supply Override Enabled Power Supply Override Enabled Power Supply Override Enabled Power Supply Override Enabled
Customers must consult the power calculator with their system configuration to verify if the server configuration is redundant before
enabling this option.
Number of Power
Supplies
Supported at
1
2
3
4
NOTES: NOTES: NOTES: NOTES:
When this selection has been set in RBSU, a "Power Supply Requirements Override has been enabled" message will be
displayed during POST.
In a one supply configuration, the external health LED will flash to warn that system is not redundant.
1
(1+ Redundancy)
Hi-Line
(208VAC and higher)
1 to 4 Processors
Redundant
POST
2
Yes No
Yes
Consult Power
Yes
Calculator
Yes
DA - 12770 North America — Version 44 — November 23, 2010
HP ProLiant DL580 Generation 5 (G5) HP ProLiant DL580 Generation 5 (G5) HP ProLiant DL580 Generation 5 (G5) HP ProLiant DL580 Generation 5 (G5)
(115VAC and lower)
1 to 2 Processors
Supported at
Redundant
POST
2
Yes No
Yes
Consult Power
Yes
Calculator
Yes
Table 2 Table 2 Table 2 Table 2
Low-Line
3 to 4 Processors
Supported at
POST
2
Yes
Yes
Consult Power
Yes
Yes
Redundant
No
Calculator
Page 50