Wipers - Renault SENIC Handbook

WINDSCREEN WASH/WIPE
Windscreen wiper
With the ignition on, move
the stalk handle 1:
• A Off
• B Intermittent wiping
The wipers will pause for
several seconds
sweeps. It is possible to vary
the time between sweeps by
turning the central ring on the
stalk 1
• C Normal wiping speed
• D Fast wiping speed
1.60
Vehicles
selection of wiping speed
If a wiping speed is selected when
the vehicle is being driven, the
wiping speed is reduced to a lower
speed when the vehicle stops:
• from fast wiping speed the speed
will change to normal wiping
speed;
• from normal wiping speed the
speed will change to intermittent
wiping.
As soon as the vehicle moves off,
wiping will return to the speed
originally selected.
When the vehicle is stationary: If
stalk switch 1 is operated, it
overrides and cancels automatic
operation.
Note:
If for any reason the wipers cannot
between
move (e.g. stuck to windscreen by
ice), the system will automatically
cut off the power supply to the

wipers.

with automatic Windscreen washer,
headlight washer
With the ignition on, move the
stalk 1 towards you.
• Car lights off
The windscreen washer will be
activated.
• Car lights on
The headlight washers will be
activated at the same time.
In frosty weather, make sure the
wiper blades are not stuck by ice
(risk of motors overheating).
Change your wiper blades as soon
as they become less
(approximately every year).
If you switch off the ignition before
switching off the windscreen wiper
(position A) the blades will stop
anywhere on the windscreen.
efficient