Error Displays - Clarion FZ501 Owner's Manual & Installation Manual

USB Devices
Problem
Cause Measure
The USB device has been Reversing the connection direction of the USB
USB device cannot
inserted with wrong direction. device, try it again.
be inserted.
The USB connector is broken. Replace with a new USB device.
USB device is not
The USB device is damaged. Disconnect the USB device and reconnect. If
recognized.
Connectors are loose.
the device is still not recognized, try replacing
with a different USB device.
No sound heard
No MP3IWMA file is stored in
with the display "No
the USB device.
Store these files properly in the USB device.
File" shown.
Sound skips or is MP3IWMA files are not encoded
Use MP3IWMA files encoded properly.
noisy.
properly.
Bluetooth
Problem
Cause Measure
Cannot pair the The device does not support the
Use another device to connect.
Bluetooth enabled profiles required for the system.
device with the car The Bluetooth function of the Refer to the user manual of the device for how
audio system.
device is not enabled. to enable the function.
The audio quality
The microphone is not correctly
Adjust the position of the microphone.
is poor after
positioned.
For example, stick the microphone onto the
dashboard where close to the driver.
connection with a
Move the device closer to the car audio system
Bluetooth-enabled
device.
The Bluetooth reception is poor. or remove any obstacle between the device
and the system.
6. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display Cause
Measure
ERROR 2 Do not support iPod & iPhone.
Change another device.
*
The head unit will return to RADIO mode.
If an error display other than the ones described above appears, press the
[RESET]
button. If
the problem persists, turn off the power and consult your store of purchase.
* When the
[RESET]
button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
23
FZ501