Phone Code; Text Input - Zte WP228+ User Manual

How to Access Network
1. Connect the phone and the computer via the USB data cable.
2. Double click the "Setup .exe" file on the pop-up window.
3. Install the software follow the prompts.
4. Then you can access network by dial-up software Sudani Wasil.

Phone Code

Phone code could prevent your phone from illegal using. The default
phone code is 0000. Change it to your own phone code as soon as
possible.
Note:
Remember your phone code, otherwise some service expense may
happen.

Text Input

Operation
Input Letters
Input Words
Input Digits
Input Symbol
Input Space
ZTE CORPORATION
Method
Multitap Input — "Abc/abc/ABC" press
corresponding letter key till the letter appears.
eHiText Input — "Eng", press any key once to key in
any word.
Numbers Input — "123", press digital key once.
Symbols Input — Press the * key to enter the
symbols mode and press corresponding digital key.
Or press the "1" key till the symbol (common
symbols) appears except for numbers input mode.
Press the "0" key, except for the "123" input mode.
WP228+ User Guide