Honeywell
For example, you want to remove tour point 5 and 6 from tour
group 2.
•
Firstly, input 2 in tour group and click ENTER.
•
Secondly, input 5 in tour point and click ENTER. Now you
have deleted tour point 5.
•
Thirdly, input 6 in tour point and click ENTER. You have
deleted tour point 6.
PATTERN
Pattern setup
•
Move cursor to highlight pattern and then input pattern value.
Input value is the pattern path you want to set (Maximally support five paths).
Click ENTER to confirm.
•
Move cursor to highlight start and then input pattern value.
Now click ENTER to confirm.
•
Move cursor to highlight stop. Input pattern value and click ENTER
to stop pattern.
Dome will automatically memorize all the operations you have done.
Pattern
Patter setup > Start
Rotation
Pattern
Pattern setup >Start
Rotation
Pattern operation
•
Pleas use up/down keys to highlight pattern. When cursor is before
start, please input pattern value and then click ENTER to begin
pattering.
•
Move cursor to highlight stop and then click ENTER. System stop
pattern.
38
Value:1
Stop
Value:1
Stop