Keyboard Setup After Network Connection; Operation; Login - Honeywell HD-JC-010 User Manual

DH1 is the first generation keyboard protocol, its corresponding DVR serial port is control
keyboard protocol or Dahua protocol.

Keyboard Setup after Network Connection

ID, device name and device type setup please refer to 6.3.2.
Use up/down to highlight connection type and then use left/right to select connection type.
Click "ENTER" to go to setup.
After all the setup, click ESC to exit. System pops up the dialogue box to prompt you save
setup.
CTL point IP"192.168.090.111
CTL port: 3777
Protocol"DH-2
Save data?
YES: ENTER NO: ESC

Operation

Login

You can use the following ways to login: ID, device name, IP, 232 address, 485 address.
Click ENTER to go to setup interface, input you information and click ENTER to begin search.
System automatically begin login if search is OK.
System pops up the alert information if there is no search result.
Note:
Before you login, please log off DVR local user menu, local user priority is higher than the
keyboard user!
Honeywell
29