Remote Control Description; Blow; Turbo; Sleep - Frigidaire Split Type Room Air Conditioner Use & Care Manual

BLOW :

10 When in cool or dry mode,
press "BLOW" button to active
or deactive blow function ,the
icon will display and the indoor
fan will continuely run for 10
minutes in order to dry the indoor
unit even though you have turned
off the unit.
11
TEMP:When pressing "TEMP" button,
there may be 3 optional icon display:
, ,
display panel will indicate ambient
temperature for 5 seconds.
12

TURBO:

/deactivate the Turbo function which
enables the unit to reach the preset
temperature in the shortest time.
In cooling mode, the unit will blow
strong cooling air with super high
fan speed. In heating mode, the
unit will blow strong heating
air with super high fan speed.
13 SLEEP: Press this button to go into
the

SLEEP

it again to cancel. This function
only can be used in
(Only for models with heating
function) or DRY mode,
maintain the most comfortable
temperature for you.
program,press this button again.

LIGHT :

14
only.
33

Remote control description

.But only is effective. The
this button to activate
Press
operation mode. Press
COOL , HEAT
and
To cancel SLEEP
Turn the unit LED light on or off
INTRODUCTION FOR SPECIAL
FUNCTION
1. ABOUT LOCK
Press "+ + " and "- - " buttons simultaneously
to lock or unlock the keypad. If the
remote controller is locked, the icon
will be displayed on it, in that case,
press any button, the mark will
flicker for three times. Repress the
combination to unlock.
2.About switch between Fahrenheit
and Centigrade
Under status of unit off, press "MODE"
and " - - " buttons simultaneously to switch
.
and