Compression Settings; Figure 4-8 Compressions Settings Tab: Primary Stream - Honeywell HD3HDIH User Manual

IP Camera Web Client

Compression Settings

54
The video signal sent from the camera to the web client has a number of settings that can
be edited which affect how the video displays in the web client. The Compression Settings
view enables you to configure these settings:
• Stream Type
• Enable/Disable the Secondary Stream (Secondary stream only)
• Resolution
• Frame Rate
• Priority (Quality or Bit Rate)
• Compression Ratio (if Quality is chosen as the priority)
• Target Bit Rate (if Bit Rate is chosen as the priority)
• Maximum Bit Rate that the camera will provide across the network (if Quality is
chosen as the priority)
• GOP (number of frames) / Key Frames
Figure 4-8 Compressions Settings Tab: Primary Stream
Your HD3 series camera supports simultaneous video streams. The Primary stream
delivers H.264 compressed video in real time 30 fps at 1280 x 720 resolution.The
Secondary stream delivers MJPEG compressed video in real time 30 fps at 640 x 360
resolution.