Mitsubishi Electric PAR-U02MEDA Instruction Book page 70

Function settings
2
The Auto-return function settings will not be effective when the set temperature range is restricted and
when the set temperature setting or timer execution is prohibited from the centralized controller.
70
The default setting is "Disabled."
To activate the Auto-return function, touch the
[Disabled] button to change it to [Enabled].
Set the following items with the
The temperatures will decrease or increase by 1ºC
or 1ºF increments.
• Cool
* Specify the time to elapse before the set temperature
automatically changes to the set temperature
specified below during cooling operation. The
settable time range is 10 to 120 minutes in 10-minute
increments.
* Specify the set temperature to be used after
the period of time specified above. The settable
temperature range is 19ºC to 35ºC (67ºF to 95ºF)
(depending on the indoor unit model).
* "Cool" includes the "Dry" and "Auto_Cool" modes.
• Heat
* Specify the time to elapse before the set temperature
automatically changes to the set temperature
specified below during heating operation. The
settable time range is 10 to 120 minutes in 10-minute
increments.
* Specify the set temperature to be used after
the period of time specified above. The settable
temperature range is 5ºC to 28ºC (40ºF to 83ºF)
(depending on the indoor unit model).
* "Heat" includes the "Auto_Heat" modes.
When done making the settings, touch [Done] to
save the settings.
Navigating through the screens
• To return to the Menu screen: [Menu] button
• To return to the previous screen: [Back] button
buttons.