Vcr Operation Setup; On-Screen Display (Osd); On-Screen Menus Setup - Zenith ZHX-313 Installation And Operating Manual, Warranty

VCR Operation Setup

On-Screen Display (OSD)

Some of these functions appear during VCR operation.
❶ ❷ ❸
PLAY HI-FI
SP
JUL 5 , SAT
❻
❶ TAPE SPEED DISPLAY
Shows the current tape speed.
❷ FUNCTION DISPLAY
Indicates the function in progress.
❸ HI-FI DISPLAY
Indicates the unit is playing back tape recorded in Hi-Fi.
❹ CHANNEL DISPLAY
Indicates the selected channel (or LINE1, LINE2).
❺ STEREO/SAP DISPLAY
Shows the type of audio signal received by the VCR tuner.
❻ DATE DISPLAY
Shows the current date. (Month/Date/Day of the week
format)
❼ CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
Each press of MEMORY/ENTER changes the TV
on-screen displays in the following sequence.
STOP CH 4
SP STEREO
JUL 5 , SAT 2:15 PM
2:15 PM
otes
The function displays remain on the TV screen for 5
seconds.
The clock (or tape counter, tape remaining) mode will
continue to be shown until you press MEMORY/ENTER.
The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
16
❹ ❺
CH 4
STEREO
2:15 PM
❼
(MONO is not displayed)
0:35:40
REM 1:58
EASY INFORMATION
If the Extended Data Service (XDS) signals are provided
along with normal TV signal in your area or during play-
back of a tape recorded with Extended Data Service
(XDS) signals, the station ID, program title, and program
details are shown on the TV screen.
When viewing a channel with Extended Data Service (XDS)
signals, press MEMORY/ENTER and the station ID will
appear on the TV screen. Press MEMORY/ENTER again
and the program details will appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press MEMORY/ENTER twice
and the program title and program details will appear on
the TV screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
CH 4
SP WABC STEREO
"Home video"
JUL 5 , MON 2:15 PM
Easy Information Screen
(Station ID)

On-Screen Menus Setup

The SETUP, clock setting (CLOCK), and timer
recordings (PROGRAM) functions are accessed conve-
niently with the on-screen menus, that lead you through
each step. The following pages describe the on-screen
menu selections available.
Menu Selection
Your VCR allows remote control adjustment of several
features.
1 1
Press MENU and the MAIN menu will appear.
2 2
Select the desired menu with v/V button and
then press MEMORY/ENTER.
ote
Menus remain on-screen for 3 minutes.
MAIN MENU
3 3
Press MENU when finished.
PROGRAM DETAILS
"Home video"
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Easy Information Screen
(Program details)
CLOCK SET (page 18)
PROGRAM (page 24)
TUNING (page 17)
SETUP (page 17)