Vcr Operation Setup; On-Screen Display (Osd); On-Screen Menus Setup - Zenith DVT723 Installation And Operating Manual

VCR Operation Setup

On-Screen Display (OSD)

Some of these functions appear during VCR operation.
PLAY HI-FI
SP
JAN 1 , SUN
TAPE SPEED DISPLAY
Shows the current tape speed.
FUNCTION DISPLAY
Indicates the function in progress.
HI-FI DISPLAY
Indicates the unit is playing back tape recorded in Hi-Fi.
INPUT DISPLAY
Indicates the selected INPUT (or LINE1, LINE2).
DATE DISPLAY
Shows the current date. (Month/Date/Day of the week
format)
CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
Each press of MEMORY/ENTER changes the TV
on-screen displays in the following sequence.
STOP LINE 1
SP
JAN 1 , SUN 2:15 PM
2:15 PM
otes
• The function displays remain on the TV screen for 5
seconds.
• The clock (or tape counter, tape remaining) mode will
continue to be shown until you press MEMORY/ENTER.
• The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
LINE 1
2:15 PM
0:35:40
REM 1:58

On-Screen Menus Setup

The SETUP, clock setting (CLOCK), and timer
recordings (PROGRAM) functions are accessed conve-
niently with the on-screen menus, that lead you through
each step. The following pages describe the on-screen
menu selections available.
Menu Selection
Your VCR allows remote control adjustment of several
features.
Press MENU and the menu will appear.
1 1
Select the desired menu with v/V button and
2 2
then press MEMORY/ENTER.
ote
Menus remain on-screen for 3 minutes.
MAIN MENU
Press MENU when finished.
3 3
CLOCK SET (page 17)
SETUP (page 16)
15